My EtherConGateway Mounting Tray

[dmoore]

I was maching some 1" (26mm) HDPE for some of my MegaBalls and I added in a "tray" just to keep the bottom and sides safe.

[KeithTarpley]

Greetings,,,

Nice.  Now just need a clear cover...

Keith

[ɟɐsʇǝppʎ]

Yes very nice and it looks so snuggly in there, a clear cover and at night the ECG will be its own little light display with all those onboard LEDs flashing.

[j1sys]

David -

I know I just published them but please read the jumper setting section near the end of the 1 Sep 2010 assembly manual. You need to rotate the DMX/Renard jumpers 90 degrees. They should be side by side at right angles to the RJ45.

Ed

Pretty box!!

[dmoore]

David -

I know I just published them but please read the jumper setting section near the end of the 1 Sep 2010 assembly manual. You need to rotate the DMX/Renard jumpers 90 degrees. They should be side by side at right angles to the RJ45.

Ed

Pretty box!!

Thanks - I couldn't quite make out the text diagram in the instructions.