Recent content by Elecgreg

you can also run your show from FPP with a play list.

It may work OK however consider what the other TWO devices you have connected and the power draw on the PSU as that is the limiting factor to the connection of devices given that the differential receiver will be controlling pixels the quantity of pixels may along with all other power being...

well that would be great interested. what area of Sydney are we talking

Have been looking at this code and it appears to be good for what I want however would someone with some better knowledge than I please help with the ethernet side I have made some changes to the code and it worked however when trying the xlights test it would not work. I have begun to thing it...

found a workaround all as i have to do is ensure I have it connected to my normal router and it fixes the problem however if it is not connected it reverts to the 169.254.x.x addressing so it can be used and will not need to be replaced at this stage $20 more now for lights or other associated...

4 port I will need at least 8

You people don’t understand I am not loaded and it makes sense to me to use something that works if possible or if you have a spare you can send it to me and I will gladly u it

SP586A as best I can tell but searching the web did not yield much information for me maybe you will have better knowledge and luck

The hub is a seperate network but that mask is a problem it runs ok just want to know how to change things so it will work for me

I have a micronet SP586A dual speed up The problem is that when I start it up the subnet mask is 255.255.0.0. as it was once on a larger network a second hand device that I once saved from scrap also the IP address is 169.254.x.x and the actual address assigned to the Raspberry Pi3B keeps...

A point to note if a cable is going to be rolled up for storage or bent in the same location both ways stranded cable is better solid will eventually fail if curvature of the cable is too tight

you could look into a DC-DC converter input side to a 12V output they are available and will ensure as the 13.2 falls to 11.8V during discharge that the 12V output will be maintained however it may take some searching to find a suitable current carrying capacity for the light strings. The...

Hopefully the boarder will be open for those mini meets

Please use English. I may be of Dutch decent but no nothing the majority here are English as native however welcome and grab the 101 read and digest then ask your questions

It would be nice but however don’t have the funds for this yet