Grozzy's latest activity
-
Grozzy replied to the thread Electrical setup help.+1 for what Skymaster said -
Yes, use the 200 ohm mode; you should see close to zero ohms. You might be able to use the diode mode too - some will show voltage drop...
-
I'll just point out that that the majority of the board in the bottom half of that photo is at lethal voltages. Be EXTREMELY careful...
-
Grozzy replied to the thread Electrical setup help.With it working before you added the pigtails, suggests your Power Supply *was* fine (maybe not now). It intermittently works would...
-
I added a few more boards today. 2 "dumb" differential boards for direct connection to the brick style power supplies. The 2 boards are...
-
Grozzy replied to the thread Shopping List.One other important question that I'm asking myself after a bad experience with pixel failures two years in a row. Am I willing to tip...
-
Grozzy reacted to djgra79's post in the thread Melbourne/Vic Melbourne Mini 2024 June 29-30 with
Like.
**14th April update** Registration is now open for the 2024 Melbourne Mini!! Please click the green RSVP button above to confirm... -
Grozzy replied to the thread WLED/WT32-ETH01 Wiring Help.I would worry that your 12v power supply has issues and you are trying to workaround something that should never behave that way in the...
-
Grozzy replied to the thread Esp32 with ethernet for a stand alone prop..I am going to be half helpful only because I am having vague recollections of having this issue a few years ago. I used a program called...
-
Grozzy replied to the thread Controlling Servo.Thanks for the correct, Didn't realise you could add more than 1 PCA9685. Might be less of a pain than trying to write code for an...
-
Grozzy replied to the thread Controlling Servo.FPP and XLights is simple to add a controller as either USB or Ethernet. Your challenge is going to be finding or writing Arduino code...
-
Grozzy replied to the thread Controlling Servo.XLights can certainly send data for 200 servos without any issue however FPP and the PCA9685 is not a cost effective solution, Not sure...
-
Grozzy replied to the thread Controlling Servo.Built a prototype hat running FPP, Worked well but never had a use case beyond a skull that I never got around to making 😔
-
-
Grozzy replied to the thread FPP Projector Control.The manual says that it does support standard class 1 pjlink so as Mike said maybe select a different NEC in the options. It mentions a...
-
