Christmas on Clarafield
Full time elf
Hi all
I'm trying to work out why I'm only getting 15v on all the outputs on Zone 2 on my Mega60.
Zone 1 & 2 both have 30v input from the same PSU and Zone 3 has 12v input from a separate PSU. Both PSU's have a common ground. I have the jumper for zone 3 also set to 12V and both zones 1 & 2 set to 30V. There is 30v going in but with a multimeter I'm only getting 15v out from any of the channels. This was tested using da_e131 with all channels set to 255 intensity. I was hoping to upload a photo but it kept crashing. I'll try to add the photo later.
Thanks
I'm trying to work out why I'm only getting 15v on all the outputs on Zone 2 on my Mega60.
Zone 1 & 2 both have 30v input from the same PSU and Zone 3 has 12v input from a separate PSU. Both PSU's have a common ground. I have the jumper for zone 3 also set to 12V and both zones 1 & 2 set to 30V. There is 30v going in but with a multimeter I'm only getting 15v out from any of the channels. This was tested using da_e131 with all channels set to 255 intensity. I was hoping to upload a photo but it kept crashing. I'll try to add the photo later.
Thanks