Hi,
All the outputs have pin 1 marked.
Outputs 1-8 are in fact the same way as the diagram on the board +,CLK,DATA,GND. That is if your looking at the board with the writing the right way up.
Thanks for the replies guys.
The whole thing about the fact of the power supplies shut down, and needing to modify the sequence make a lot of sense.
I do have a background in the electrical and electronic fields so I am aware of some peoples confusion with the current drawn rather than the...
Hi,
I am a newbe here and I was just wondering if people ever use any form of diversification when working out what power supplies or cabling to use.
Oven here in the UK the house wiring for the ring main is rated at 32A but that only covers 3 sockets pulling full load, but we normally have...
Hi AussieDoug,
Thanks for that, I have that image out of the manual but it does not have how far the 4mm holes are for the edges. It shows that the spacing between the holes is 75.5mm but not the distance from the top or edge of the board.
The top right 3mm hole is marked as 12mm from the top...
Hi,
Can any one let me know the locations for the 4mm fixing holes on the PixLite16 board.
On page 18 of the manual it shows the spacings of the 4mm holes but not a reference distance from the top right corner of the board like the 3mm holes have.
Thanks
Hi,
over here in the UK, I believe the usage of FM transmitters is very strongly controlled so I was wondering about using Wifi to transmit the audio for a show.
Maybe having a website people can connect to with a link to a live webcast carrying the audio.
Has anyone had experience with this...