You are trying to connect with the bootloader within seconds after the reboot?
Firmware upgrade's can only be handled by the ubl as far as I Know...
Greetings, robert
I have 5000 ws2811 pixel modules connected in the same way as you have, I only use the P12R....
Things you can check;
Make sure the UTP is 1:1 straight.
Also play with the baudrate, I have 15mtr of UTP and a baudrate of 1800.
Check the lights again without the extender and make sure they work...
a couple of day's ago ed contacted me and showed me that I uploaded the wrong hex file to the P12r.
For anyone interested I've modified the sheet sheet from Jeff Rae to be used with the P12r
original post for the PIXAD8 is here...
Today I tried to program a P12R with a Pickit3 and a Y-cable from ed.
I have programmed the unit with:
http://www.j1sys.com/assets/p12r-2.0a.zip
In MPLab I get:
PICkit 3 detected
Connecting to PICkit 3...
Firmware Suite Version...... 01.28.90
Firmware...
Below is some text I got from ed.
also attached are the chematics I got from him.
Kind regards, Robert
(edit 18-jan, fixed attachments)
The PPR-A:
RJ1 is the input via a PPX cable as described in the PPX documents.
P1 is a 2 x 1 x 4 3.5mm connector.
The top row of P1 is pins 1-4 and is used...
Can you connect with the UBL tool (ethernet or USB)?
Had the same thing once when I loaded the wrong(p2) firmware in my P12r :-[ :-[ :-[
I was able to connect with the UBL tool and reflash with the correct firmware....
Greetings, Robert
Hi,
After all the questions we finally had our show.
I've made a little youtube video with a little impression.
Hope to make some video's that will show some more on the technical side...
It's a mobile car that's about 25m long, 4m width and at the top 9m high.
Power is coming from a 60kVA...
Thanks all!
Just finished programming 4500 pixels in HLS, You bet I want all the work on video!!! ;D
The parade is february 10th 19:00h. (GMT+1) Everything is tested in parts, testing the whole thing as we build it up! We keep our fingers crossed!!! :-X
Greetings, Robert