Chase tool on groups

Minh Tuan

New elf
Joined
Nov 14, 2014
Messages
18
Location
Kings Park
I've added rgb pixels to my lor software and added each pixel strip as a group. When i use the chase tool to make a chase on the groups, it chases the individual pixels within that group instead and not the whole groups itself.
Is there a way to make the groups chase instead of the pixels?
 

Attachments

  • Untitled.png
    Untitled.png
    174.3 KB · Views: 23

AAH

I love blinky lights :)
Community project designer
Joined
Dec 27, 2010
Messages
4,188
Location
Eaglehawk
Are you wanting to do a chase so that it turns on all of a group at a time and then chases to the next 1?
 

AAH

I love blinky lights :)
Community project designer
Joined
Dec 27, 2010
Messages
4,188
Location
Eaglehawk
You could force it to do that with some cutting and pasting or duplicating stuff across channels but what you are experiencing is the usual chase. It moves through the group which means it does a chase across your pixels.
 

AAH

I love blinky lights :)
Community project designer
Joined
Dec 27, 2010
Messages
4,188
Location
Eaglehawk
what you can do to do a bodgy fix is to create a new group that has the 1st channel of each of your groups in it. Do a chase through that group and then go to where your pixel group/s are and do a chase down through them or else a copy and paste with "stretch to fit" selected.
 

Minh Tuan

New elf
Joined
Nov 14, 2014
Messages
18
Location
Kings Park
Copy and paste with stretch to fit kinda works but it doesn't come out even, some lights are on slower and faster than the other
 

Attachments

  • Untitled.png
    Untitled.png
    150.4 KB · Views: 10
Top