13 channel LED DMX stage lights

Discussion in 'LightShow Pro (LSP)' started by Fensom, Nov 21, 2013.

  1. Fensom

    Fensom New Elf

    Joined:
    Nov 14, 2013
    Messages:
    16
    Likes Received:
    0
    Location:
    Bundaberg
    I have a 13 channel dmx led stage (4) lights I got from China. The instruction manual was sparse and not very clear.

    They weren't working very well until I placed the 13th channel on another controller in LSP. Now I have 4 RGB channels on the first controller in LSP and the 13th on another controller. I used the "Test controller Hardware, and discovered that channel 13 acts as a type of master control for the other lights, with 0 being off, 255 being on, 2 to 190 intensity, 202 to 249 being for strobe (200 slow to 249 fast)

    Not sure what 191 to 201 is supposed to do, but all 4 lights come on with a red colour with 5 green pixels on each light. This is regardless of what rgb color is set on the lights.


    202 to 249 being for strobe (200 slow to 249 fast)

    Just wondering what is the best way to set it up in LSP? Is there any way to automatically set channel 13 to 255 every time I choose a colour on the the lights?

    Thanks.
     
  2. OP
    OP
    Fensom

    Fensom New Elf

    Joined:
    Nov 14, 2013
    Messages:
    16
    Likes Received:
    0
    Location:
    Bundaberg
    I think I've worked it out, just testing. I created a virtual controller and linked both channel 13 and rgb channel 1 (1,2,3). Not sure if that's the right way, but it seems to be working.
     

Share This Page