1. New to Christmas lighting? Get started with the AusChristmasLighting 101 Manual:
    auschristmaslighting.com/wiki/AusChristmasLighting-101

Creating RGB e.131 channels in LOR

Discussion in 'DMX, E1.31 & Networking' started by cooper88, Aug 31, 2014.

  1. cooper88

    cooper88 New Elf

    Joined:
    Jul 5, 2013
    Messages:
    42
    Likes Received:
    0
    Location:
    Sydney NSW
    I have managed to connect my Sandevices board to LOR successfully and can see it in the coms listener but how do you created the rgb channels required for e.131 in the LOR sequencer?


    Advice is much appreciated
     
  2. AAH

    AAH I love blinky lights :) Community Project Designer

    Joined:
    Dec 27, 2010
    Messages:
    2,543
    Likes Received:
    14
    Location:
    Eaglehawk
    Find Me On:
    It's hard to know how much you've worked out and at what stage you're at.
    For a start you need LOR advanced to have access to dmx and E1.31.
    Creating channels is pretty much as easy as right clicking over the channel list and adding channels or rgb channels. I find it easier (for dmx/e1.31) to add a device and it will then give you an option of automatically numbering you channels if you start at #1. The channels then get configured as dmx channels with a universe number and channel number. You can convert existing channels by right clicking and changing to RBG channel where it will then ask if you want to do more than just the 1.
     
  3. Ɠαяєтн

    Ɠαяєтн Mae gen i C.L.A.P ei heintus iawn

    Joined:
    Dec 27, 2010
    Messages:
    160
    Likes Received:
    0
    Location:
    Landsdale, Perth, Western Australia
  4. OP
    OP
    cooper88

    cooper88 New Elf

    Joined:
    Jul 5, 2013
    Messages:
    42
    Likes Received:
    0
    Location:
    Sydney NSW
    Thanks I do have the advance version ahh and thanks for the YouTube video Gareth.
     

Share This Page