Dmx fixtures facing wrong way in respect to actual Frontage of roof

[Christmas30]

Hi I've added the dmx fixtures to the layout and sequence but in respect to the roof line the dmx units are to the side when they should be facing towards the front 90 degrees around the position they are is there any way to. Rotate these units within xlights or should. I take that as the way they need to. Sit. On the roof when fitting the. In situ and just take it as it is

 

[djgra79]

Pretty sure its this field on the model properties. Have a play around with it to see if it reflects what you have physically

 

[Christmas30]

hi there thanks for reply ive tried altering pan orientation and that adjusts the arrow on the direction but not the actual model in sequencer if that makes sense.

 

[Christmas30]

0 degrees is the side to the roof if that makes sense where as it would. Have been useful to. Have had 0 degrees on the layout at the front does that make sense