1. New to Christmas lighting? Get started with the AusChristmasLighting 101 Manual:
    auschristmaslighting.com/wiki/AusChristmasLighting-101

hello from chattanooga,tn

Discussion in 'New Members Say Hello' started by bbustamente, Jan 19, 2017.

  1. bbustamente

    bbustamente New Elf

    Joined:
    Jan 19, 2017
    Messages:
    2
    Likes Received:
    0
    Location:
    chattanooga, Tn
    Hi, everyone


    i am a newbie to this pixels stuff, i came off LOR, i just don't know where to start, i bought a holiday coro alphapix 4 but it is giving me problems, i want to get a F16v2 i know f16v3 is coming out, i have some pixels in hand, but i don't know how all the wiring is done, but i know of bunch of u guys r willing to help.
     
  2. scamper

    scamper Senior Elf

    Joined:
    Jan 5, 2014
    Messages:
    771
    Likes Received:
    53
    Location:
    collie
    Find Me On:
    If you haven't already, jump onto this manual and have a read
    https://auschristmaslighting.com/forums/index.php/topic,1889.0.html


    As far as the falcon board goes, if you want one now and can't wait for the v3 and you can get your hands on a v2, then go for it, it is still a great board. I have a couple and they are great.
    After you read the manual and then read the info on the board, you can find lots of videos on how it all goes together which is so much easier to see rather than someone telling you.
    Then when you have any questions ask away. as it is a bit open as to what to tell you.
     
  3. OzAz

    OzAz Full Time Elf Generous Elf

    Joined:
    Dec 29, 2015
    Messages:
    338
    Likes Received:
    49
    Location:
    Newcastle
    Hi, Welcome to ACL


    What sort of problems are you having with the alphapix?
     
  4. OP
    OP
    bbustamente

    bbustamente New Elf

    Joined:
    Jan 19, 2017
    Messages:
    2
    Likes Received:
    0
    Location:
    chattanooga, Tn
    yeah i have been watching a lot videos on the falcon, the chip went bad on it and i bought 10 chips and i bent all 10 chips just trying to put back in, so i am new to it
     
  5. fasteddy

    fasteddy I have C.L.A.P Global Moderator Generous Elf

    Joined:
    Apr 26, 2010
    Messages:
    6,487
    Likes Received:
    19
    Location:
    Albion Park NSW
    Find Me On:
    Welcome to ACL, I hope you find the info your looking for.

    Must have been very frustrating bending the pins on all 10 chips.
     

Share This Page