|Stable Version||1.6 download|
|Falcon Player (*.fseq)|
- 1 Introduction
- 2 Demonstrations
- 3 Hardware
- 4 New Installation Defaults
- 5 Exporting Data for Falcon Player
- 6 Importing Data into Falcon Player
- 7 See Also
Falcon Player (Original Name Falcon Pi Player, FPP) does remote playback of your sequences without a using relatively expensive laptop/desktop. It is a solution to the conductor or director products. The Falcon Player (FP) runs on Linux, which is on a Single Board Computer. e.g. Raspberry Pi (AU$40 - 60, depending on extras)
Don't let the fact that it runs on Linux put you off, the installation is very easy, and once booted a web interface is used to configure everything an average person would want to change.
FPP runs on Raspberry PI (numerous versions), Beaglebone Black and can be ported to other Linux based single board computers. FPP can control lights via the E1.31 interface, USB dongles for DMX, Renard, Pixelnet or via plug in capes like the Octoscroller which is used for controlling P10 panels.
Raspberry Pi + LightShow Pro
The FP runs on the following hardware:
New Installation Defaults
The default username and password combination for new Falcon Player installations is "fpp" and "falcon".
Exporting Data for Falcon Player
The following section covers exporting your show data from various software.
LightShow Pro (LSP)
- In LSP Configure Controllers, can not have any left out channels. You need to use a dummy controller if you have gaps.
- In xLights Configure Controllers, the same way/order as in LSP. i.e. Channel 1 in xlights is the same as Channel 1 in LSP and so on. i.e. No Gaps. (Download)
- Export to a conductor sequence, it should list all your controllers.
- Start xlights, go to the "Concert" tab.
- Click on "Choose Files", in the "Select File" window change the file type too "Lynx Conductor Sequence (*.seq)", select the file you have exported from LSP.
- Tick the boxes for "Map Empty LMS Channels" and "All channels off at end"
- Change the xlights output format too "Falcon Player (.fseq)"
- Click on Start Conversion, it will ask for the audio/media file if needed, find it and open it.
- The "Conversion Messages" panel should indicate any issues and the name of the output file.
Light-O-Rama S3 (LOR S3)
- In LOR Sequence Editor, Tools > Channel Configuration, adjust the controller and channel numbers so that they are no gaps. For whole controllers, use the Change Controller button. For individual channels, use the drop-down selection box. You cannot have any gaps in your channel numbers. The next step is to convert the channel type to a DMX Universe, where applicable.
Importing Data into Falcon Player
- Channel Outputs is configured the same as software which created the sequence.
- You have already converted the file to a "Falcon Player (.fseq)" file.
- Falcon Player web interface, goto the "File Manager", "Sequence Tab"
- Drag your "Falcon Player (.fseq)" file (display in what ever OS file manger you use) over the top of the "Select Files" icon. You should see it uploading
- Repeat this process for any Audio or Video which is needed by the sequence.