Nodent
Apprentice elf
Hello all,
I came across a chart on http://www.holidaycoro.com/PixLite-E1-31-Pixel-Controller-p/621.htm and having the E6802. I questioned the information on it and sent Jim an email.
He was shocked at how much of the information was wrong about his product.
-----------------------------
Me to Jim
> BTW is it true your controllers can only do 1 universe per output?
>
> http://www.holidaycoro.com/PixLite-E1-31-Pixel-Controller-p/621.htm
>
> Look at the chart.
The chart has a lot of errors:
Max DMX channels is 3,060, should be 6,120
Max DMX channels for Advatek is wrong, can only be 8,192 (16 outputs x 512
channels per output)
Max pixels per SPI output is 170, should be 999
DMX Outputs is 4, should be 16
Null pixels middle of string should be NO
Refresh rate is not adjustable
SPI output wiring diagram silkscreen is NO should be YES
Misc comments: Polyfuses (Advatek) are a bad idea. Their trip point
varies a lot with temperature and having one fixed value means you can't
change fuse value if needed.
Also, the Advatek can only be configured for one pixel type at a time.
The SanDevices and J1Sys controllers use the same connector pinout,
Advatek is different.
-jim-
------------------------------
So when your shopping, get the info straight from the source.
I came across a chart on http://www.holidaycoro.com/PixLite-E1-31-Pixel-Controller-p/621.htm and having the E6802. I questioned the information on it and sent Jim an email.
He was shocked at how much of the information was wrong about his product.
-----------------------------
Me to Jim
> BTW is it true your controllers can only do 1 universe per output?
>
> http://www.holidaycoro.com/PixLite-E1-31-Pixel-Controller-p/621.htm
>
> Look at the chart.
The chart has a lot of errors:
Max DMX channels is 3,060, should be 6,120
Max DMX channels for Advatek is wrong, can only be 8,192 (16 outputs x 512
channels per output)
Max pixels per SPI output is 170, should be 999
DMX Outputs is 4, should be 16
Null pixels middle of string should be NO
Refresh rate is not adjustable
SPI output wiring diagram silkscreen is NO should be YES
Misc comments: Polyfuses (Advatek) are a bad idea. Their trip point
varies a lot with temperature and having one fixed value means you can't
change fuse value if needed.
Also, the Advatek can only be configured for one pixel type at a time.
The SanDevices and J1Sys controllers use the same connector pinout,
Advatek is different.
-jim-
------------------------------
So when your shopping, get the info straight from the source.