lizardking
IT IS STILL ALL BENS FAULT
Hi all Aussiephil has discovered something by using 75ohm coax on 2811 pixels for data and got a run of 70 m from the coax.
I also ran a test on 2811 just using the center copper wire with the same 75 ohm coax i reached a length of 120 m with 50 pixels so more testing will be needed but there is another option for long runs to the first pixel i do have a corrupt data signal as i have just twisted the wires together cause my soldering iron wont get the coax hot enough to solder but squeezing the wires tight with pliers seemed to work but it alsoit could be the ray wu pixel tester
https://www.dropbox.com/s/jjoce7nxp74jqav/2015-05-17%2010.51.14.mp4?dl=0
I also ran a test on 2811 just using the center copper wire with the same 75 ohm coax i reached a length of 120 m with 50 pixels so more testing will be needed but there is another option for long runs to the first pixel i do have a corrupt data signal as i have just twisted the wires together cause my soldering iron wont get the coax hot enough to solder but squeezing the wires tight with pliers seemed to work but it alsoit could be the ray wu pixel tester
https://www.dropbox.com/s/jjoce7nxp74jqav/2015-05-17%2010.51.14.mp4?dl=0