-
-
Indigogyre reacted to sackboy's post in the thread OLED Display in Argon EON Case (Raspberry Pi 5) – Mirrored and Dim Output with
Like.
I found the command that flips it Horizontally. I ran it in the SSH shell, and it works! fpp@FPPMaster:~/fpp/src $ i2cset -y 1 0x3C... -
Indigogyre replied to the thread OLED Display in Argon EON Case (Raspberry Pi 5) – Mirrored and Dim Output.Have you tried rotating the OLED in the case? :D Seriously, I think this is a more fundamental OS level issue than a FPP issue. You can...
-
Indigogyre replied to the thread AusChristmasLighting Merch.Some gents wear earrings! :)
-
Indigogyre replied to the thread Last Bullet Pixel in 270 pixel String Won't Light Up With Xlights But Will With Baldrickboard Software..While I cannot comment on swapping the two data lines, I would really like to see how your controller is setup even if the data lines...
-
Indigogyre replied to the thread First Pixel Order – Would Love Some Advice.I see you have a bunch of Ts but no pigtails. Not sure if you need 50 Ts but pigtails always come in useful to have on hand.
-
Indigogyre replied to the thread Air seed tubing leaping arches vs pixel hole leaping arches.I originally started with strips in tube but the effects are fairly limited to what they will do. I also found mine to be more twitchy...
-
Indigogyre replied to the thread Tube and pipe bender.HI, So for these sorts of things it would be best to post the link to the product instead of a simple image. The image does not...
-
Indigogyre reacted to Johnnyboy's post in the thread First Pixel Order – Would Love Some Advice with Like.
When you are ordering that many, you can get them anyway you like. Get the seeds made up with the exact number you need with the exact...
-
Indigogyre replied to the thread First Pixel Order – Would Love Some Advice.Do those prices included shipping or is shipping an additional cost. I've been quoted both ways before and if shipping is not included...
-
Indigogyre replied to the thread Pigtail screw cap.It's easy, just warm up the screw cap with a blow dryer or heat gun just enough to make it flexible and pull it off. Just repeat the...
-
Indigogyre reacted to ryanschristmaslights's post in the thread AusChristmasLighting 101 Manual with Appreciate.
At last, 101 Fourth Edition is now available for download (see top post). Just in time for the first Australian Mini of the year...
-
Indigogyre reacted to Kent's post in the thread FPP on Raspberry Pi CM4 with MCUZone CM4-4G Carrier Board with Like.
I still have more of the CM4 carrier boards that I can take to the Sydney Mini if anyone is interested.
-
-
Loading…
-
Loading…
-
Loading…
-
Loading…
-
Loading…