-
-
Homer911 replied to the thread Back to basics.I just asked ChapGPT the same question and this is what I got in return.... Connecting your ESP32 with a USB-C port to xLights using a... -
Homer911 replied to the thread Back to basics.I have re-installed XLights and I noticed that I got the green light on for about 60 seconds. Then dropped out. I'm thinking that I is...
-
Homer911 replied to the thread Back to basics.OK, thanks. That's what I thought. I only connect it via USB as the DigQuad is not portable. I have checked my router and that is...
-
Homer911 replied to the thread Back to basics.Shouldn't I still see the green light if I have the ESP32 connected with a USB to the computer? Of is the green light only for wifi...
-
Active should be set to "Active" not to "Xlights Only" Open a command prompt or terminal and type in ping 192.168.1.1 replace the IP...
-
Homer911 replied to the thread Back to basics.Unreachable I'm finding it difficult to set up as the tree is in the front lawn and outside the home wifi signal. So I have a booster...
-
Homer911 replied to the thread Back to basics.I have Unticked "Keep Channel Numbers and still the same. I already have them set to Active on Xlights only.
-
Homer911 replied to the thread Back to basics.No, both are red How do I ping the controllers
-
Hey All, I created a mega tree last year and just made it in time...😆 I have now created a star for the top of the tree. For the life...
-
-
Hey Guys, Last year I made a mega tree and I used up all of my DigQuad (5). I have another DigQuad that I will be using for the mega...
-
Homer911 replied to the thread Mega Tree Star Material & Thickness.EEmmmmm, no. Can't find that. I'll keep searching. You mean here?
-
-
Homer911 replied to the thread Mega Tree Star Material & Thickness.Thanks. So do I have to import a new mega tree model that has a start or can I just add a star to an existing tree model? Still fairly...
-
Homer911 replied to the thread Mega Tree Star Material & Thickness.Great, thanks guys, I went with the below: Star 24 - Christmas Props Australia First time working with a star. How should I lay it...
-
Hey Guys, I made a mega tree last year and this year I would like to make a star to add to the display. I would like to know what...
-
-
Loading…
-
Loading…
