Recent content by AussiePhil

Thank you, credit to a few people for helping out

Update 3rd September - all spacing options, corner pieces and mounting options are now published for free on Thingiverse. https://www.thingiverse.com/thing:6753173 File shows the 25,30,40 and 50mm spacing options

..... continued, the only one that did not fit was the new 4 wire 6. Know shine 5v, 5cm, 4-wire 2024 they are relatively quite larger in bulk than the rest and will need a tweaked design, whilst i would prefer a universal design it may be better to make 2 versions

A huge thanks to Rob from the FB group for sending me some samples. I wide variety of types and sizes, details below 1 to 5 fit and insert with no issues, 6 however is a newer bigger one from 2024 and will need a tweak to the design 1. BTF Lighting 5v 10cm spacing 3-wire 2. Maybe Knowshine...

Realised overnight that the conduit clips needed an anti-rotation option so back into F360 and test printed... did find out that printing them solid was not a great idea.... to many perimeters from the previous print and i broke one..... ooops. the 16x10 is a tight fit and anyone that plans to...

Round conduit to 16x10 Deta square clips have been completed, I'm still waiting on some sample pixels to turn up before a release the entire system for use. If anyone wants to print and test the snap strips then i'm happy to post a STL for a 5 pixel strip, long enough to test with and low on...

I use PETG for all external prints these days. I used ABS nearly exclusively years back but it eventually goes brittle with UV... PETG is really good and cheap these days and easier to print. I remodeled the gutter clips and they should fit but would appreciate a test, just took your profile...

Just grab this flat wall clip to test out the fillet chamfer setup, I should have a new gutter clip based on your stl a bit latter today

Ok two questions. Why such a long stand off/distance from the gutter and what is the hook under for at the bottom? cable management? Here is a screenshot of the joiner, just extruded a 60mm length of the corner piece that i know works. Note the internal fillet and the chamfer, the internal...

Many thanks, the gutter clip is immensely valuable, can you post u picture of the gutter profile it is for please.. I've loaded both up in the slicer and I have a couple if small tweaks to make both easier to print, i'll get back to you. Cheers

Good question, aiming for the end of the week, as i'm now waiting on a small parcel from a generous person to test fit the newer style..... cheers

Yes... awesome work and huge ongoing thanks to everyone who proudly keeps ACL running

Edit Update 3rd September - all spacing options, corner pieces and mounting options are now published for free on Thingiverse. https://www.thingiverse.com/thing:6753173 I initially put this up on the unofficial FB group to gauge any interest and get some initial comments of a little 3D printed...

I would never have guessed over the years, Look after yourself Alan.

Sadly my mother (mum) passed away peacefully on Sunday night. She had six days of palliative care after a fall at the nursing home and a chest infection, she certainly proved the nurses and doctor wrong and passed on her own terms and timing. My sister, one of her sons and I were with her that...