Recent content by Bartjet

All 14 gauge wire for the runs and 6 gauge between the fuse blocks and the power supply

Ok, so if I loop all the v- together it should be ok with the power supplies. Uncledan said i also need to connect the V- from the port to the first pixel but based on the aspect of V- being a reference wouldn't connecting the port to the V- block and having the first pixel also connected to...

Yeah, each psu goes to a fuse block, then the fuse block distributes to 1 set of pixels, like you said, my main concern was in the V- side. I have the V- of the port on the controller going to the V- on the fuse block and not all the way out to the pixels. And each port is going to a...

Hello to the experts out here. I have another question below is what I am looking at doing, Just wondering if this would work. or am I missing something. Simple explanation is 4 power supplies with fuse blocks, lights powered directly from the fuse blocks both V+ and V-. controller powered...

Ok, thank you. I was basically basing my power injection using 14AWG from Bill Porters xlights presentation on YouTube from November 2018. I am using ws2812b strip 5V 30 pixels/meter. The biggest reason for my question was that the outdoor landscape cable that he said to use doesn't fit...

Hello everyone, I am just getting into this hobby and am starting with rgb on my house. Following a design from a YouTube video, the plan is to put strip inside alluminum channels on the ridge lines of the house. Where I am running into trouble is with power injection wire. I am trying to...