Mega tree options - kits, construction ideas

Juddge

Juddge

Full time elf
Generous elf
Joined
Oct 15, 2023
Messages
301
Location
Glenmore Park - Penrith Area
Hi everyone , I made a DIY tree out of pixel seeds , but they are very floppy and sway around too much in the wind - I’m going to recycle the seeds as matrix panels
So I want to get a tree , preferably - a high pixel count , with a lot of strands
I want to
Use my HE123 with as many strings as possible
So the tree is tight and very pleasant to view

where did everyone get their trees from
In Australia
And I’m going to need a few thousand pixels
 
Edcon steel for the post, Ray Wu pixels, Bunnings for all the winch, pulleys, steel cables, sleeve, concrete, Extreme Lighting Displays for the MT strip, @BooY for the topper, and my wife found the base(trampoline) on gumtree from a local

Completely DIY
 
No real pre-built options, everyone's needs and budget will vary.
There's an enitire section of the forums dedicated to megatrees including a database pinned at the top where members share what compenents they used which might be helpful
auschristmaslighting.com

Mega, mini, spiral & pixel trees

For everything related to Mega Trees, Pixel Trees, Mini Trees, Giga Trees, Z Trees and Spiral Trees. E.g.: how to build them, sequencing techniques, storage options, just to name a few! Post your experiences or ask questions.
auschristmaslighting.com auschristmaslighting.com
 
Just a comment on tensioning the MT seeds - I ended up with the solution below.

The original concept started as I wanted the width at the base to be a bit wider than the trampoline base I had available, so decided to print some extender arms.
It turned out this allowed me to get pretty good tension control because of the way they clamp to the base ring. Basically screw the clamp so that it is mostly tight, push down on the arm at the seed end to get the right 'feel' for the tension, whilst tightening the screw to clamp with the other hand.
I also used these brackets to ensure the correct alternate node spacing on each string.

If you're venturing east before pack up, I'd be more than happy to show it in person. @Skymaster isn't far from me and I'm sure he'd be happy to show you his MT with bullets approach.

PXL_20231226_053403888.jpg
 
Its barely not windy where I am so these are a good idea are as I have a had some strips let go this season20231227_152616[1].jpg
 
Kent said:
If you're venturing east before pack up, I'd be more than happy to show it in person. @Skymaster isn't far from me and I'm sure he'd be happy to show you his MT with bullets approach.
Click to expand...
Yep more than happy to go through any part of my display with anyone who wants to see it.
 
I’ve got a 48 x 200 string tree. 40nb heavy duty pipe with a load brake winch to haul it up . I got my own laser cut 10mm topper and the good old 8ft tramp ring strips from boscoyo.
 

Attachments

  • IMG_7712.jpeg
    IMG_7712.jpeg
    1.1 MB · Views: 27
mattosdesigns.com

Sasquatch™ MegaTree™ Kit

AVAILABLE FOR PRE-ORDER NOW, WITH DELIVERIES EXPECTED IN LATE MAY 2024. Pick the kit you want. DIY kit includes the following: 1-Sliding Topper of choice (32, 48, 64 or 96 hole) 1-Pulley Cap 1-Stand Alone Base 1-1200 Lbs. 49' Hand Winch 32 to 96 -Topper Carabiners 32 to 96 - Pixel Strip Bungee...
mattosdesigns.com mattosdesigns.com

if you're chasing a kit. Just assemble and add pixels. Out of stock variants will be back instock in the new year apparently
 
Kent said:
Just a comment on tensioning the MT seeds - I ended up with the solution below.

The original concept started as I wanted the width at the base to be a bit wider than the trampoline base I had available, so decided to print some extender arms.
It turned out this allowed me to get pretty good tension control because of the way they clamp to the base ring. Basically screw the clamp so that it is mostly tight, push down on the arm at the seed end to get the right 'feel' for the tension, whilst tightening the screw to clamp with the other hand.
I also used these brackets to ensure the correct alternate node spacing on each string.

If you're venturing east before pack up, I'd be more than happy to show it in person. @Skymaster isn't far from me and I'm sure he'd be happy to show you his MT with bullets approach.

View attachment 25008
Click to expand...
any chance i could get the STL file for the clips you have here ?
 
You must log in or register to reply here.
Back
Top