2015

Presented by AussiePhil for the Adelaide Mini 2015 - Day 2. Multicast versus Unicast. Wifi or Wired Networks? Do you need the features of a router or is a sw...

Presented by Superman for the Adelaide Mini 2015 - Day 2. A walkthrough on projecting video onto your whole house using a short throw projector and a combina...

Presented by AussiePhil for the Adelaide Mini 2015 - Day 2. What is 3D Printing and how is it useful to Christmas lighting? In this video the printing proces...

Presented by damo1271 for the Adelaide Mini 2015 - Day 2. A practical demonstration on how to create your own wireframes.

Presented by Superman for the Adelaide Mini 2015 - Day 2. Thanks to Falcon (Pi) Player, you no longer need to have a "show computer" running your show. Apolo...

Presented by damo1271 for the Adelaide Mini 2015 - Day 1. So you're converting your display to full E1.31 and don't want to retire your older SSR hardware......

Presented by damo1271 for the Adelaide Mini 2015 - Day 1. A D.I.Y. method for creating your own null pixels using assembled WS2811 boards.

Presented by darylc for the Adelaide Mini 2015 - Day 1.

Presented by darylc for the Adelaide Mini 2015 - Day 1. Uses for the BeagleBone Black as a controller, particularly to drive a P10 panel matrix with the Octoscroller cape

Presented by AussiePhil for the Adelaide Mini 2015 - Day 1. Experiment: Just what happens when you send 30 volts through a 12 volt dumb RGB strip? 100+ degree temperatures and possibly magic smoke. Do not try this at home!

Presented by darylc for the Adelaide Mini 2015 - Day 1. How hot can controller enclosures get?

Presented by AussiePhil for the Adelaide Mini 2015 - Day 1. Short circuits... Dry solder joints... How do you find the fault? Australian Christmas Lighting a...

Presented by AussiePhil for the Adelaide Mini 2015 - Day 1. Incandescent, LED, and RGB. AC and DC. What's what?

Presented by darylc for the Sydney Mini 2015 - Day 1. How to control your 240v power remotely ... Turning your power supplies on and off without running back and forth during testing

Presented by darylc for the Sydney Mini 2015 - Day 1. How hot do your controllers and their enclosures get and are vents alone enough or are fans also necessary

Presented by lithgowlights for the Sydney Mini 2015 - Day 1. Electrical safety tips using fuses and the correct wiring method for running power supplies with different voltages

Presented by bbayjohn for the Sydney Mini 2015 - Day 1. VPT 7, a free software utility for achieving 3D Projection from a single projector.

Presented by Fasteddy for the 2015 Sydney Mini - Day 1. 3D Printer Basic Introduction and Flashforge Dreamer demonstration

Presented by BradsXmasLights for the 2015 Sydney Mini - Day 1. A look back at how synchronised lighting has developed over the years.

Presented by bbayjohn for the 2015 Sydney Mini - Day 1. Light-O-Rama S4 Sequencer Editor / SuperStar / Pixel Editor

Presented by BradsXmasLights for the 2015 Sydney Mini - Day 1. Vixen 3.1 Introduction

June 20-21 2015, Geek (Fullarton)

May 30-31 2015, Ipswich

May 23-24 2015, Sydney Fish Markets

2015 Adelaide Mini, Register your attendance Date : 20th / 21st June 2015 Time : Set up at 9:30am Start -10:00am Finish 4:00pm (lunch break at 12:30) Venue : Elnino has provided a central location at 242 Glen Osmond Road at Fullarton Cost : $5 per person, per day, payable on the Saturday...