ACL 'Using Pixels with the J1SYS ECG-P12R' Controller Guide

[fasteddy]

ACL and J1SYS are proud to announce the 'Using Pixels with the J1SYS ECG-P12R' pixel controller Guide
This manual goes into detail on how to setup and control pixels using the J1SYS ECG-P12R pixel controller.

The ECG-P12R pixel controller offers great features at an affordable price and this manual will help people understand how to connect and control pixels using various software and hardware configurations. The manual is 33 pages of graphical information to help you get running.

This guide can also be used for the J1SYS-PIXAD8 pixel controller as 90% of the manual is common for both controllers.

This current manual covers firmware revision 2.0a

Comments and input regarding this manual can be left here

We hope that this guide helps those understand the requirements and configuration required in setting up a pixel based display.

The ACL Team and J1SYS


Note: You need to be registered and logged in to be able to download this file

 

[fasteddy]

Re: ACL 'Using Pixels with the J1SYS ECG-P12R' Controller Guide Password update

****IMPORTANT****

With the new update to the J1SYS controllers it has had a password/username change

Also details of using the new Universal Boot loader can be seen here

So the manual is incorrect and it will be eventually updated as i get time


Username: admin

Password: Password is left blank now by default


THE ECG CONTROLLER SERIES NOW SUPPORTS THE 2811 PIXELS AND THIS HAS BEEN USED AND TESTED IN MANY 2012 SHOWS

 

[fasteddy]

Here is a video that will also make setting up this great hardware even easier, thanks to Andy Harrison

ECG-P12R hardware setup

View: https://www.youtube.com/watch?v=JfzjHc9mHNA