mrpackethead
Full time elf
Hi, some useful information for you on teh function of the LEDS on this board, if you are interested. I know a few others did'nt know and Ed passed this on to me, so i though i'd let you know;
Dx1 is a heartbeat, it should be flashing at about 1Hz ( once per second ).. Basically letting you know that pic is running
Dx2 is SPI transfer.. it will be dimmly lit if data is transferring between this slave and the main ECG
Dx3 is DMX/REN Transmit.. If data is going out this, led will be flashing..
Dx4 is DMX Receive, but it is code that is not yet implemented, so dont' worry about it!
Dx1 is a heartbeat, it should be flashing at about 1Hz ( once per second ).. Basically letting you know that pic is running
Dx2 is SPI transfer.. it will be dimmly lit if data is transferring between this slave and the main ECG
Dx3 is DMX/REN Transmit.. If data is going out this, led will be flashing..
Dx4 is DMX Receive, but it is code that is not yet implemented, so dont' worry about it!
