Glue for rare earth magnets

[Danielr]

Hi all. Looking for some recommendations on the type of glue I should use for rare earth magnets to conduit? Thankyou

 

[LawrenceDriveLights]

Maybe a epoxy

 

[TANSA]

I have seen Heat shrink used.

 

[Danielr]

Ok thankyou

 

[drakky]

there's a product we use at work will grab the name of it , it will stick anything to absolutely anything comes in a tube like silicone

 

[Danielr]

thanks Drakky. I used a liquid nails and it didn't hold at all so would be good to see what you have. I also purchased these to try https://www.amazon.com/gp/product/B081V9XLNF/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1, so I will be switching to those for next year.

 

[Katekate]

epoxy

 

[Nojoy]

Selleys 24ml Araldite Ultra Clear Epoxy Glue

Find Selleys 24ml Araldite Ultra Clear Epoxy Glue at Bunnings. Visit your local store for the widest range of products.

www.bunnings.com.au

 

[Shane G]

as a user of the magnets myself i used double sided tape to some perspex and put heatshrink over it and screwed a conduit clip to that. Just make sure you have the magnets sealed or you will get rust stains on the metal you are sticking them to.

 

[marmalade]

Try liquid nails polyurethane (far better than the regular stuff).

This has held cabletie clips to our tiled roof for many years, nothing else came close to working. I've actually not yet found anything it won't stick together.

It's also ever so slightly flexible, just don't use to much as it expands with the moisture content from the air..and wear gloves because it sticks to skin best of all!

 

[drakky]

this is the stuff I was talking about , as you can see it can be used for underwater purposes also

 

[Danielr]

Thanks drakky