Help, not addressing all pixels on port

[Camaro4life18]

Hello, sorry if this is not the right area for this. I'm new to christmas lighting, and trying to get my house setup for the first time. I am working on my house lines first, where I have pixels across my garage, and I just added more strings across my dormers. I have the garage line on port 1, and the 2 dormers on port 2. I have run my own perm wire to all the strings, with a power injecting T between the 2 dormers.

I am using a Falcon F16v3. Here is how I have it configured for the strings:


My problem, is the "House Dormer" string 2 on port 2, only the 1st light is working. I ran a temporary wire from port 3 to the 2nd string and got all of the lights to work. But when I have them daisy chained on port 2 with the above config, just that 1st light works. Any ideas what I am doing wrong? I feel like its an addressing issues.

 

[Camaro4life18]

I've tried testing both ways, through the falcon, and through xLights. Here is my xLights setup, and then you can see the 1 loan pixel on the right dormer.

 

[scamper]

Silly question, but if it was working and you have just set this up, did you hit save?
I am not sure about this setup as you are using absolute channels where I use universes, so there may be something that needs sorting there.