Looking for software recomendations for running electrodragon hub75 board.

[Bradistherad1]

Hi, I'm looking for recommendations for software to run this hub75 board, and a dedicated raspberry pi, connected over ethernet. I would like to set it up as a virtual matrix in Xlights.

RGB LED Matrix Panel Drive Board For Raspberry Pi - ElectroDragon

Based on the active adapter board of hzeller RPI matrix git project, full compatible and extra functions added. Support up to three port output to drive, P0, P1 and P2 (HUB75). Support Raspberry Pi 2 and 3, most pins used for matrix driving. (RPI4 need change firmware, please see comments)...

www.electrodragon.com

 

[darylc]

Typically you'd use FPP on this pi, but I've not heard of FPP supporting this hat though, perhaps it works if they used the same pinouts as the supported hats?

You might find buying a supported hat an easier way forward? eg http://www.hansonelectronics.com.au/product/rpi-p10/

 

[SmartAlecLights]

Hi, I'm looking for recommendations for software to run this hub75 board, and a dedicated raspberry pi, connected over ethernet. I would like to set it up as a virtual matrix in Xlights.

RGB LED Matrix Panel Drive Board For Raspberry Pi - ElectroDragon

Based on the active adapter board of hzeller RPI matrix git project, full compatible and extra functions added. Support up to three port output to drive, P0, P1 and P2 (HUB75). Support Raspberry Pi 2 and 3, most pins used for matrix driving. (RPI4 need change firmware, please see comments)...

www.electrodragon.com

I got board similar a couple of years ago. it involves playing with FPP pinout configuration etc.
I stopped trying. an just got ones that were compatible with FPP

 

[RitBitq]

This guy seems to got it working with the electrodragon hat: https://blinkygeek.com/builds-and-deep-dives/matrix-in-a-box/