OLED display replacement for Falcon F16V3

[burto51]

Hi all, seems I need to replace my OLED display on my F16V3, have completed factory reset, reboots still blank.
Opened controller and it operates normally so assuming it is the display. Checked with aus pixelcontroller, no luck out of stock.
Any other options in Aus.

Burto

 

[darylc]

if you are not in a hurry I can help you out, but I don't go to the post office very often

 

[BAZMick]

7Pin Blue Color 0.96 Inch 128X64 Blue OLED Display | Light it Up LEDs Xmas

7Pin Blue Color 0.96 Inch 128X64 Blue OLED Display Screen Module 0.96" IIC I2C SPI Communication..96 inch OLED Display for F16v3, F48 and F4V3 and other Controller boards.

www.lightitupleds-xmas.com.au

 

[Skymaster]

Any will work like BazMick has linked, however, just ensure the pins are in the same order. Some have input power polarity swapped, some are mirror imaged - you may need to use a couple of insulated wire standoffs if the pinout needs changing.

 

[burto51]

Thanks to all, will give lightupleds a go.

Burto

 

[BAZMick]

The holes for the plastic stand offs don't line up quite right, but the screen works perfect

 

[burnt]

i replaced my faulty oled with this https://vi.aliexpress.com/item/3286..._main.121.1a8b1802eFNVuY&gatewayAdapt=glo2vnm

 

[burto51]

Thanks ordered from Aliexpress.