lizardking
IT IS STILL ALL BENS FAULT
hi all I am using the P12S with 2 universes per output and will be running 6 strings of 50 pixels per output which will be 18 amps per output i am running 24 strings so 4 outputs, do i have to run the strings 2 strings from one side of the board and 2 strings from the other side of the board i have 1 psu per side of the p12s at 350w @60amps plus one more psu for power injection so running 100 pixels of power out of each output of the p12s will be 6 amps at full white so if i power the strings this way will i be correct
1. data and power to the strings 1 and 2
2. data to strings 3,4,5,6,
3. power to strings 3,4,5,6 from the 3rd psu which will be 12 amps over all the 4 strings
4.can i run just data from the p12s or do i need to run power and data to the first string at least from the p12s
really confused
1. data and power to the strings 1 and 2
2. data to strings 3,4,5,6,
3. power to strings 3,4,5,6 from the 3rd psu which will be 12 amps over all the 4 strings
4.can i run just data from the p12s or do i need to run power and data to the first string at least from the p12s
really confused