P PhilW New elf Joined Aug 9, 2016 Messages 21 Location 6171 Aug 14, 2016 #1 Hi still trying to get my display ready for this year (first attempt) all you expert helpers out there would this work. Attachments lightsetup.docx 121.1 KB · Views: 32
Hi still trying to get my display ready for this year (first attempt) all you expert helpers out there would this work.
fasteddy I have C.L.A.P Global moderator Joined Apr 26, 2010 Messages 6,647 Location Albion Park NSW Aug 15, 2016 #2 Should turn out nice, but if you are using lights with power packs then you will have to be careful not to use dimming or very fast on/offs as this will damage the power packs
Should turn out nice, but if you are using lights with power packs then you will have to be careful not to use dimming or very fast on/offs as this will damage the power packs
I i13 Dedicated elf Joined Jul 5, 2013 Messages 1,172 Aug 15, 2016 #4 There are problems with your planned setup: Plugpacks can have a delay between their input and output and it even varies each time. Like Fasteddy said, don't dim them. AC controller channels can get temporarily stuck on when using LED light sets that don't draw enough power. Sending signal through USB can cause stuttering. Light-O-Rama hardware will work but it is relatively expensive. Same with their software.
There are problems with your planned setup: Plugpacks can have a delay between their input and output and it even varies each time. Like Fasteddy said, don't dim them. AC controller channels can get temporarily stuck on when using LED light sets that don't draw enough power. Sending signal through USB can cause stuttering. Light-O-Rama hardware will work but it is relatively expensive. Same with their software.