Latest activity
-
Johnnyboy replied to the thread Different Angled houses Xlights setup.You can create a 3D model yourself or there are companies that can do it for you. View... -
GHi Guys, So my house is a bit of a pain with angles on the sides I can work with. how do you set it up in Xlights? do you just take...
-
DinoChickenSuit replied to the thread FPP Not Liking WLAN.Ah.... I'm using the inbuilt WLAN0 on the pi, could that be the problem? -
brother fergy reacted to boddio's post in the thread DMX Programming for 1152 12V Dummy LED's with
Like.
UPDATE: I tried the ENTTEC DMX Open USB and did not get it to work with the Pi. It works as I tested it with my laptop directly. That's... -
Skymaster replied to the thread Falcon v3 problem..I believe this is just a misunderstanding with the way it has been communicated. As the OP says (quoted below), the same SD card with... -
Skymaster replied to the thread Falcon v3 problem..That is not correct for a v3 Falcon. Only the v4's and later support web upgrade. From the upgrade instructions that ship with the zip...
-
Juddge replied to the thread Falcon v3 problem..also if it is the Falcon, they are web page controlled for GUI access, and you can select the firmware file you have downloaded to... -
Juddge replied to the thread Falcon v3 problem..falcon use their own version of firmware for their products not the FPP Software you would need to download the firmware...
-
Skymaster reacted to boddio's post in the thread DMX Programming for 1152 12V Dummy LED's with Like.
UPDATE: I tried the ENTTEC DMX Open USB and did not get it to work with the Pi. It works as I tested it with my laptop directly. That's...
-
Bboddio replied to the thread DMX Programming for 1152 12V Dummy LED's.UPDATE: I tried the ENTTEC DMX Open USB and did not get it to work with the Pi. It works as I tested it with my laptop directly. That's...
-
-
Pprof replied to the thread FPP Not Liking WLAN.Sorry missed your reply. wlan1 (external usb) is set up fully to connect to the show network via wifi. With properly filled out fields...
-
mellowcouple replied to the thread Falcon v3 problem..Hi, Geoff, I was using a 16gig card, it worked fine on 1 of my Falcons but would not work with the 2nd one. Thanks' for the reply, Ron. -
Mischka replied to the thread Falcon v3 problem..Hi Ron, What size SD Card are you using? Use a 32GB or smaller and see if that works. Cheers Geoff -
Hi, is there anyone in Adelaide who can have a look at my v3 falcon controller. I tried to update to the latest version of fpp but...
-
merryoncherry replied to the thread First build - HDPE arches.It's early in the season, plenty of time to get samples of the lights you want to use and try them. You will quickly learn that a few...
