E1.31 Controller Default IP and Login Credentials Printable version

The following is a list of common E1.31 pixel and dmx boards, their default IPs, the default user and pass details as well as the method in which test mode (if any) is accessed.

J1Sys

Default IP: 10.10.10.10
Username: admin
Password: (blank)
Username (old firmware): J1Sys
Password (old firmware): EthConGwy

Applies to: ECG-P2, ECG-P12R, ECG-P12S

----

Default IP: 10.10.10.10
Username: admin
Password: EthConGwy

Applies to: ECG-PIXAD8, ECG-DR4

SanDevices

Default IP: 192.168.1.206
Username: unknown
Password: unknown

Applies to: E6804

Advatek Lights

Default IP: 192.168.0.50. Access only via config utility (Advatek Assistant).

Applies to: PixLite 4, PixLite 16

Falcon Christmas

Default IP: 192.168.1.50 DHCP

Applies to: F16v2, F4v2, F16v3, F4v3

BeagleBone Black running Falcon Player (FPP)

Default IP: DHCP
ssh user/pass is fpp/falcon
IP is displayed by default on the video output at startup

Raspberry Pi running Falcon Player (FPP)

Default IP: DHCP
ssh user/pass is fpp/falcon
IP's announced at startup via audio output by default
IP is displayed by default on the video output at startup

Stellascapes

Possible defaults are:
Default IP: Zero Config IP Range 169.254.0.0, DHCP or 10.10.10.10
Username: admin
Password: Sse16

Applies to: E-16, TS-16