-
-
Back when my hands weren't cactus I have actually crimped IDC connectors in my bare hands. I do have the proper parallel jaw crimping... -
Alan sells the cable and connectors: https://www.hansonelectronics.com.au/product/idc16_ribbon/...
-
Boof63 replied to the thread p10 panels - fpp test messy.only problem is Jaycar is 2 hours away, have looked online and they do sell idc cable by the meter ,so will have to wait till i get to...
-
Your issue looks to be the interpretation of what the arrows mean. They are an indicator of the "up" direction of the panels. You've put...
-
Mine (3Hx4W) I have all the arrows on the panels pointing the same direction. Ie. Left and down, then set FPP to the same or mirrored...
-
I need pics of fpp panel layout and result to have any idea.
-
Look closely at how the panels are laid out and they arrow changes and make sure the arrows in fpp match the way the arrows on the...
-
My brain is too mushy at this time of year to process much. On the final picture if you flip the arrows around 180 degrees for panels...
-
A cheap 5 or 8 port switch should free up your outputs on your router. You can run the Pi in player mode or remote mode. In remote mode...
-
You should be able to go to Jaycar and buy the bits to make one Just take a sample of what you have to make sure you get the right...
-
Boof63 replied to the thread p10 panels - fpp test messy.Hi Alan, thanks for reply, i need a cable IDC that is 1.4mts long, is there away to join 2-3 smaller cables or can i find one long one...
-
Boof63 replied to the thread p10 panels - fpp test messy.if the above works ie all date left to right and ide cables cant be longer than 36 inches, = running two PIs=Hats for th matrix. if so...
-
Boof63 replied to the thread p10 panels - fpp test messy.think i may ahve worked it out, my matrix starts top right (looking from the back ) i think i need to realign the panels (obviously he...
-
Boof63 replied to the thread p10 panels - fpp test messy.setup has been same for 8 years, no power problems or hot wiring, but understand concerns, if i flip panels then starting corners will...
-
Boof63 replied to the thread p10 panels - fpp test messy.here is rotated panels 1&2 back and fpp test, only panels 1&2 connected hence odd lights and black on panels 5-8 cheers and again...
-
-
-
Loading…
-
Loading…
