-
-
Hey all, I'm just giving an update that I am currently out of stock of all sizes of the toppers, and more than likely wont have a chance... -
I'd be installing 3 phase.. It's getting to the point a single phase connection isn't enough Pull boxes/pits in the ground between...
-
B4IGO replied to the thread Wiring for new house.A few things I would have done if we were building again: might be too late for this one, but 2-3 nice fat conduits from the garage...
-
I'm relativity confident it told you both the same thing 😜
-
I got a similar response when I asked chatgpt initially, but I started this thread to get other's real world experiences as I know many...
-
Omada is good kit. It's what unifi used to be when they were targeting business before becoming overpriced bling central.
-
B4IGO replied to the thread Outdoor wifi / AP solutions.I'm using UniFi U6-Mesh AP's all connected via ethernet and powered by PoE. I have 3 - one upstairs, one downstairs and one in the...
-
B4IGO reacted to Luckyphil32's post in the thread Last Bullet Pixel in 270 pixel String Won't Light Up With Xlights But Will With Baldrickboard Software. with
Like.
SUCCESS! My 3 -> 4 core adaptors are configured incorrectly as @merryoncherry stated above. I made my own adaptor up and retested, now... -
B4IGO reacted to thewanderingpine's post in the thread Last Bullet Pixel in 270 pixel String Won't Light Up With Xlights But Will With Baldrickboard Software. with Like.
But it did “fix” that when edited in the Baldrick Ui. (Assuming I read the message correctly) I wonder if just needed to upload the...
-
B4IGO reacted to Cranzy's post in the thread Last Bullet Pixel in 270 pixel String Won't Light Up With Xlights But Will With Baldrickboard Software. with Like.
As you have just started setting this up. I would very HIGHLY suggest you setup this star using the native star model in xlights and...
-
Hi folks, just a quick shout out to all the Aussie members. We have a new bouncy song “Christmas in Australia” that as the title...
-
B4IGO replied to the thread WS2815 12V Seed Pixel Purchase Query.Do 50mm and double it over :) This image is not tensioned, as you can see, but 42 strands, 192 pixels per strand at 25mm spacing :)...
-
-
B4IGO reacted to Juddge's post in the thread Air seed tubing leaping arches vs pixel hole leaping arches with Like.
i used LED Strip so that it sat right along the bottom edge of the seeder tube as the light go up and over the inside of the tubing, due...
-
Here's a very quick one I chucked together today. The music was AI generated and then further tweaked - the lyrics specifically...
-
I've been asked a few times now for the Bluey - Flashing Lights sequence, so here's my version of it uploaded to the xLights Share...
-
-
Loading…
-
Loading…
-
Loading…
