-
-
Johnnyboy reacted to ScientificHobbyist's post in the thread Cable pass-through for brick with
Like.
T That's a good idea. I may just have to put a small access panel in the ceiling of the garage so i can route the cables since I don't... -
Johnnyboy replied to the thread Cable pass-through for brick.I drilled a hole on the outside and in the garage and put in RJ45 gland. Does the trick nicely To get access to install, I pulled up a...
-
-
Johnnyboy replied to the thread info on making window frames for pixels.Gotta do a test piece to measure how far to drill ensure you dont widen out the 12mm front side. Ask me how i know......
-
Johnnyboy reacted to ScientificHobbyist's post in the thread Christmas Kiosk (Touchscreen Remote Falcon) with Like.
This was one of my favorite additions this year. It was especially used by the pre-phone kids that couldn't scan a QR code to select...
-
Johnnyboy reacted to bert-nc's post in the thread info on making window frames for pixels with Like.
Thanks for all the suggestions I had made a jig but think I need to refine it And be sure to mark the center line down the pvc
-
Johnnyboy reacted to bert-nc's post in the thread info on making window frames for pixels with Like.
Thanks for the detailed procedure I have been following your posts and have learned a lot Will give it another try
-
Johnnyboy replied to the thread info on making window frames for pixels.I’ve drilled a lot of holes in conduit. I think I’m at just 3400pixels at 1inch spacing. My process - layout a bunch of pipe on the...
-
-
Just got another 2 Baldrick 8s which pretty much guarantees a Baldrick 16 will be released next week...🤣
-
Johnnyboy replied to the thread Raspberry Pi "In & Out" Hat: Inputs + Pixel Outputs.thanks for remembering! I was/am I sent @Phillhutcho a DM yesterday after seeing the post, just waiting to hear back :)
-
Well I will have to find the other two. look what arrived today :-)
-
Johnnyboy replied to the thread storage issues.I have everything in the attic/roof space. In Perth, Australia its hot as buggery with temps in the roof reaching up to 70c in when we...
-
Hi, I have decided my 2025 New Year’s resolution is to spend too much time playing with sequences and display options on Xlights.
-
The 25mm mesh aperture seems to have held up well. I went with 50mm on my matrix this year as my seeds are 2inch spaced, and also went...
-
Johnnyboy replied to the thread Driveway 'matrix' materials query.I created a garage matrix out of seeds (560x22) using garden trellis from Bunnings. I used just over 3000 cable ties and they kept the...
-
-
Johnnyboy replied to the thread Looking for X-Connect pigtails to connect to controller -newbie.Use 50cm pigtails for controller boxes, having a little extra length really comes in handy. If you’re making up custom length pixels...
-
-
Loading…
-
Loading…
-
Loading…
-
Loading…
