Recent content by brainless

4G also has more latency that fixed line services such as Adsl/vdsl (FTTN) etc and this can make it feel slow as bandwidth is not anything. http://au.billion.com/bipac-8900ax-2400 this would do the trick but the VOIP provided on NBN Services is not a generic SIP service and you will most likely...

last year we got some Cadbuy baubles as pictured below to put on the tree and as one does i noticed that once you remove the wrapping it is a pretty sweet housing to add a few RGB pixels to, took all of 5 minutes to drill a few holes and add 2 x Pixels into the lid...

Yeh shipping is a pain but if you buy more than one it ends up about 33 per light which is still alright for something ready made

Anyone looking for controllable spots i just got 3 of these from aliexpress and they work great Ordered on the 12th late at night and arrived yesterday, 12 days is not to bad for delivery, $21 bucks a piece...

Code im using now is, the relays are no longer always powered and wired to NC for the load /* Original code created January 4th, 2014 by Claude Heintz http://lx.claudeheintzdesign.com/lxarduino_sketches.html modified by: Jared Alexander This code is in the public domain. sACN E 1.31 is a...

Awesome thanks

Just an update, I was not able to successfully drive the relays with the code but i found another code which is also able to be used with my uno arduinos and should be more than sufficient for the relays per Arduino If anyone wants to use it i have put it below, ensure that the relays are...

I have wired it similar to this, the example is for a 4 x Relay but in this case it is the 6 I have taken the Pinouts from reference i found in the code however this could be completely wrong, as pins 22,23,24 etc should be outputting for pixels not Relays

Thanks keith im probably just not using it properly, what changes are needed to the code to use relays and which pins are they triggered from The relays i use are prebuilt arduino shields that trigger on 5v, i have used them in previous years with serial code on the arduino for my christmas...

Hi All, Im chasing assistance to program an ethermega+w5100 to drive Relays via the Digital Pins Does anyone have code to do this, i have been able to use keithsw1111's code to drive Pixels which is great but unable to get it to trigger the relays