MikeKrebs's latest activity
-
MMikeKrebs replied to the thread Bypass Flasher Controls.Can you set the lights to be always on and they remember that and then use an ac controller? Likely won't dim but you could flash them...
-
MMikeKrebs replied to the thread Looking for advice please.Many xLights users don't do their own sequences. They use the free shared sequences or the bought versions. It is nice that LOR put...
-
MMikeKrebs replied to the thread Help with TM1814 and wled.You would put the relay in the V+ line from where ever your power is flowing to the pixels. On the pigtail makes sense if that is where...
-
MMikeKrebs replied to the thread Cannot access Settings (and other things) in xLights.You can install xLights into a different directory and see if that resolves the issues. Uninstalling and installing xLights should not...
-
MMikeKrebs replied to the thread Help with TM1814 and wled.TM1814 will display a test pattern when not actively driven by a microcontroller. I would either put relay on the power line or send...
-
MMikeKrebs replied to the thread kulp k8 -B issue..I assume your response says you have the cape installed? Kulp controllers come with a license and the EEPROM file for FPP. Contact Kulp...
-
MMikeKrebs replied to the thread First Custom Build.Any fuse appropriately placed and sized will work. I used a fuse block inside the enclosure when I tested power injection. Ultimately...
-
MMikeKrebs replied to the thread kulp k8 -B issue..I don't have one so someone who knows should correct but I think that might be an EEPROM issue? Is the correct file on the EEPROM?
-
MMikeKrebs replied to the thread First Custom Build.I would go for larger PSU. The one I looked at the other day, the most efficient use of the PSU was at 50% load. And it would nice to...