-
-
MMikeKrebs replied to the thread kulp k8 -B issue..I assume your response says you have the cape installed? Kulp controllers come with a license and the EEPROM file for FPP. Contact Kulp...
-
MMikeKrebs replied to the thread First Custom Build.Any fuse appropriately placed and sized will work. I used a fuse block inside the enclosure when I tested power injection. Ultimately...
-
MMikeKrebs replied to the thread kulp k8 -B issue..I don't have one so someone who knows should correct but I think that might be an EEPROM issue? Is the correct file on the EEPROM?
-
MMikeKrebs replied to the thread First Custom Build.I would go for larger PSU. The one I looked at the other day, the most efficient use of the PSU was at 50% load. And it would nice to...
-
MMikeKrebs replied to the thread Raspberry pi 4.FPP on RPi => ethernet switch => Baldrick Power cables Same connector on pixels as you are getting on the Baldrick. If you are doing...
-
MMikeKrebs replied to the thread Error Message - What Have I Done?.Another case where you should get some personal help in the zoom room. I suspect you have multiple "show" folders and you probably need...
-
MMikeKrebs replied to the thread New starter.Educating yourself before sinking a lot of money is good but more importantly, try something and expand from there. Buying a kit is good...
-
MMikeKrebs replied to the thread Help with Seed Pixel and WLED voltage\power issue.If the chip is damaged, it won't pass data.
-
MMikeKrebs replied to the thread Hello from Monterrey Mexico.Welcome. It is an interesting hobby.
-
-
Loading…
-
Loading…