Recent content by Nizlights

Yeah, mine started working after I did all this. Im looking at buying a new controller for next year from same supplier. Just to keep it all the same.

Hi Aaron, I actually ended up getting the show going again. I ended up changing the IP address to a static and it worked. Happy to help to the best of my availabilities if you still want to get three going :) . Send me a massage

Can I please ask one more question. I got everything going but 3 of my windows sometimes stay stuck on a very dim red now. It will come unstuck by itself sometimes. But sometimes stays dimmed red and wont change at all. Would this also be due to cabling ? I have attached a photo for reference...

Amazing thank you so much. 🙏 luckily I have some click extensions sitting here I can trial on. Thanks again.

I have turned them all down to 30% Seem to be running perfectly now. Just have to change my cat6 cables to different cable as all my cat6 cabled props are the ones thats doing this.

I am running it on normal mode. But it turned out the Cat6 cables i was using were not sufficient. When I changed the cable to proper extension cables, everything works fine. Im going to buy different stronger cables.

Thank you again for the help. I was running cat6 cables and turned out that was the issue. I swapped to a proper extension i brought a while back and it worked. Did the test run yesterday and everything seems to work but I will change the cat6 cables to the click ones. Do you use the neutral...

Hi Suz, Thank you very much. From what yourself and Skymaster said above, I finally got my controller and Xlights communicating. That side of it all seem to match up now and it's slowly coming back to my memory haha. I do have another small issue hope you dont mind giving your opinion on...

Thank you very much this worked. :) appreciate it

Hi all, I did a very small show 5 years ago and started doing it again this year. All my props are ready and sequence is done. Tried for about 4 days to connect my Pixlite 16 via Advatek to Xlights and I seem to be going backwards. I ended up deleting all controllers off Xlights and re...

Hey everyone , new here to the hobby. Got my sequences and layout of done but however im still struggling to connect the pixlite16 through the advatek website to xlights . Been trying for 4days now . Also im using pixel strips to start with and for reson when i pluga strip on to the second...