Recent content by paranco

  1. P

    Distance controller pixelite16

    The negative has not been drawn but obviously is connected. The section of the cable used is 0.5mm
  2. P

    Distance controller pixelite16

    This is a schematic diagram of: blue line = 5v power Green line = signal Rectangle red = strip of LEDs
  3. P

    Distance controller pixelite16

    AAH Thanks for your answer all strings are fed individually and use two feeders 30A The problem of the lights flickering them I though at that time are turned on only 40% of the lights, while in a sequence where I turn on all the lights together (red and blue alternately) no problems flicker.
  4. P

    Distance controller pixelite16

    actually the beginning of the sequence with a few pixels on, the sequence is correct, when the pixels become many sequence is no longer correct wrong color and position. Separate the wires being inside a sheath will be difficult I mounted everything, maybe I can shorten the wires to the minimum...
  5. P

    Distance controller pixelite16

    hello L_Tay thanks for the reply, the cables are all inside a sheath and are 5mm section but are not shielded ... the problem is the shield? does not count the length of the cable? I forgot, the sheath there are power cords
  6. P

    Distance controller pixelite16

    Hello everyone A question use a controller pixelite16 with 22 RGB LED strips ws2811, maximum distance that I can hold between the controller and the first pixel. Consider that I joined 2 strips for a total of 300 pixels and I like 5 meters away from the controller, only that when I want to...
  7. P

    hello to all from Italy

    hello to all I found this interesting forum, and I would like to create a lighting system as often as you prove, I hope do do it with your help. Sorry for my bad English :)
Top