Dave,
Cute song and my daughter loves it. Thanks sharing. I located the video and edited to match the song. What do you think?
View: https://youtu.be/KQmYFH6PeLU
Tried the duct vent and looks great but did not hold up for the winter. Live in Canada with the cold and snow and the duct vent was brittle and breaking in places so did not work.
I am in Kelowna and this is my second year doing the pixels and sequencing. If you pass by this way come check it out. If you need any help let me know.
There is another thread on other board about making this prop. http://doityourselfchristmas.com/forums/showthread.php?46289-Easy-6-Spinner-StarFlakes&p=461226#post461226
This link goes to the post I did with the video of mine. Attached is the layout of my model from xLights. I made the...
I made a flat mega tree for last season. It was 12 legs of 120 pixel in 4 meter lengths of pixel strip. Since it was in the strip I could not change the spacing of the pixels so since I started all the strips the same at the top they didn't match up at the bottom. But it still looked good...
That is why I am asking this question. I have 240 pixels on each output, 2 strips of 120 pixels each, so I put 2 universes of 120 pixels on each output. But this did not work, as I described in a previous post. Only when I used the full 170 pixels, 510 channels, per universe did it work and...
So I went and set each universe in HLS to 170 pixels = 510 channels. This works. Yeah... Just have 1 strip that not all the pixels are lighting under this though. Will have to do some testing and see what is going on. Question though. Why do I have to use all 510 channels in a universe...
I did the Assign Channels to Pixels option in HLS and have it doing the Bottom to Top then Top to Bottom. That is not the problem. When I do the Output - Test By Manually Turning Lights ON or OFF option I step through the channels. Everything works fine for the 1st pixel strip S001P001 -...