Hi everyone.
This is a very quick buy for a PCB that was requested by a member months ago.
What is it?
It is a 450mm x 18mm (18" x 0.7") PCB on which can be mounted 5050 RGB LED's.
LED's are in groups of 3. Each group of three has it's own resistors.
6 or 12 LEDs most be mounted.
Jumpers allow for connection to 12V DC or 24V DC.
LED spacing is approximately 37mm (1.7")
One end has footprint for a RJ45 socket as well as a 4P header the same as used on the TigerDMX120.
Current draw assuming resistors set for 20mA
12V
6 LEDs.... 40mA per colour/channel, 120mA from positive
12 LEDs.. 80mA per colour/channel, 240mA from positive
24V
Half of the 12V figures.
Here's a screen capture of the PCB

Pricing.
Pricing based on current volume of 250 PCB's to be ordered.
Price will be $2.40 per PCB including all fees, excluding shipping to you.
Phil
This is a very quick buy for a PCB that was requested by a member months ago.
What is it?
It is a 450mm x 18mm (18" x 0.7") PCB on which can be mounted 5050 RGB LED's.
LED's are in groups of 3. Each group of three has it's own resistors.
6 or 12 LEDs most be mounted.
Jumpers allow for connection to 12V DC or 24V DC.
LED spacing is approximately 37mm (1.7")
One end has footprint for a RJ45 socket as well as a 4P header the same as used on the TigerDMX120.
Current draw assuming resistors set for 20mA
12V
6 LEDs.... 40mA per colour/channel, 120mA from positive
12 LEDs.. 80mA per colour/channel, 240mA from positive
24V
Half of the 12V figures.
Here's a screen capture of the PCB

Pricing.
Pricing based on current volume of 250 PCB's to be ordered.
Price will be $2.40 per PCB including all fees, excluding shipping to you.
Phil