DMX controller for 6803 strips.

[fasteddy]

you can control each 3.9" section by itself so you can make chasing effects and other patterns. 3-LED Cuttable. Don't worry about pigtail multiple strips off the previous strips output. I bought the digital LPD6803 RGB LED strips for 129 bucks.

for similar 6803 strip we are paying $65 from Ray Wu

 

[fasteddy]

Hey again guys, I did confirm another light was getting signal from the console. I've got the strip controller chained to a par can and both set to channel 1 for testing. The par light responds while the strip controller does not. I only have an input XLR end made up so I haven't been able to test if the DMX signal would pass threw the strip controller. I did pop the controller open and all connections to the DMX terminals look fine. I'm at a loss. I'm gonna drop Ray an email but if you guys think of anything else please let me know.

Thanks a pile for the help fellers,
Chris

Does the unit have a DMX signal light and if so does it change state when a DMX signal is being recieved. Start with the basics and have it all set up as channel 1 (you most probably have already done this) and as well double check your XLR adaptor for correct wiring