Drill Press Pixel Pusher STL

[Dreamin]

Designed to use a 1/2" socket adapter like his https://www.bunnings.com.au/trojan-3-piece-socket-adaptor-power-bit-set_p6332794

One side has a indent to keep it secure. I haven't printed it yet, needs testing, print it, give me feedback if it needs adjusted.

https://www.dropbox.com/s/oz6hctot2sgqjr5/PixelPusherv2_drillpressversion_final.stl?dl=0

Update: Update the file, with little cylinder on the outside so you know what side to put the ball. Tested and it inserts fine, and was removable with a little wiggle. Should work perfectly

 

[Dreamin]

 

[stevelee]

Have you tried it out ? I’d be interested in it for pushing pixels into conduit for roof and window lines.

 

[Dreamin]

Have you tried it out ? I’d be interested in it for pushing pixels into conduit for roof and window lines.

I found it awkward to use. The cables fair got in the way. Maybe with a bit of jiggling it would work, but after nearly damaging some wires I went back to manual pushing with some gloves on. Worked for me as I angled it in and didn't take too long.

 

[Adsy]

Damn looked like a good option.
Oh well back to the pixel pliers

 

[stevelee]

I found it awkward to use. The cables fair got in the way. Maybe with a bit of jiggling it would work, but after nearly damaging some wires I went back to manual pushing with some gloves on. Worked for me as I angled it in and didn't take too long.

That’s a shame. It looked like a great idea