Enttec OpenDMX & FPP (Raspberry Pi)

[buddyrurus]

I bought a Raspberry Pi with the intention of running DMX Lights off it, with the option to be able to program them in Xlights.
I have a USB to DMX Male cord running from the Raspberry Pi to the lights. I setup the outputs correctly in FPP, and tested and confirmed it outputted.
But when I setup my FPP in Xlights, and output my signal, theres no response to the lights. I know I'm receiving data because I get the abnormal conditions warning.
Anyone have any ideas of what I am doing wrong?

 

[AAH]

I can't see anything wrong there necessarily. Try setting Vendor to FPP and set type to Pi Hat. Xlights and FPP are getting a bit more particular about having matching details at both ends. Uploading details from Xlights might break your usb dmx output settings but hopefully a quick change afterwards back to usb will fix it.

 

[dkulp]

If you are getting that warning it's because you didn't enable the DDP channel input. Thus, it's not processing the incoming data at all, just displaying the warning.