F16V2 different power

[deblen]

Hi,


Iam loco king at splitting my F16V2 board so I can use 12volt for 1side, and 24 volt for the other.


Do I have to set any switches, as I have searched but cannot find anything.


Is there anything I should be careful of before I swidth on the power supplies.


Thanks in advance.


Deblen

 

[scamper]

just reread the instructions that came with it to be sure 24v is ok, but I think it is fine just to do it.
I have 12v on the right side of the board (which also powers it) and 5v on the left side for all the 5v pixels I use.
There was no jumpers or switches that needed moving.

 

[deblen]

Hi scamper.


Thanks, I checked the power, can be between 5v and 24 volt.


Hopefully this weekend I can plug it in.


Deblen