FPP Pixel count wrong compared to Xlights - Help Please

S

Steve Eggins

New elf
Joined
Dec 16, 2017
Messages
19
Hey Everyone,
I am hoping I have a simple issue and I am just having a shocker somewhere in xlights.

I have completed setup and testing phase of my lights, for reference I have:
1 x F16v4 eith 2 SRx1 LR Extenders
1 x F16v3 with 2 SRx1 LR Extenders

My Problem is, With Xlights I have used visualizer to send out all props strings etc.
Using upload to controllers all works perfect, I can use the test button on either controller all lights work, I can use the falcon web interface and all lights work on boith controllers.

My issue is FPP is droppping channels It has stopped at 15300 but the controller and Xlights see all 16480 or something (Sorry I am not at home to get exact number)


Any ideas? am i missing something stupid?

Thanks very much
Steve
 
Have you uploaded using 'Bulk Controller Upload' which is under tools.?
After this is done shut down and powe down the FFP and reboot.
 
Steve Eggins said:
My issue is FPP is droppping channels It has stopped at 15300 but the controller and Xlights see all 16480 or something (Sorry I am not at home to get exact number)
Click to expand...
You probably havent done an FPP Connect since updating your controllers. Select "UDP Out" to all. You don't need to upload any sequences - this will just push the configuration to FPP
 
Arrggghhh thankyou so much!!!
Weird thing is, I did the FFp connect and bulk controller uploads, reboots etc.
But I did FFP connect with sequences, as soon as I did it without sequences all the channels came up!!
Thanks so much, it was sending me crazy!!
 
With sequences will also send the configuration.
The advantage of doing it without means you dont have to wait :)
 
Yeah but I did do it, like 4 different times!! So weird hey. Anyway that was the workaround so thatnks so much for helping out. Now I can start on my roof :)
 
You must log in or register to reply here.
Back
Top