silver_ice
New elf
- Joined
- Jan 6, 2023
- Messages
- 28
- Thread starter
- #16
Hello
I added some stuff to my F3D drop box - https://www.dropbox.com/scl/fo/bbq9...ey=q1f42kax37oy0pia7a8qc0ulb&st=57w7pgbu&dl=0
- 99 Node Candy Canes (just null pixel the end node for your 100strings and set it up as a 3x33 matrix, works great https://www.dropbox.com/scl/fi/7ji4...ey=fuyc91xqgkw6dk9ykk3lk5r73&st=19g5j4fz&dl=0)
- 80 Node MiniTree, Dalek style, makes a 180 deg tree, 16 x 5 https://www.dropbox.com/scl/fi/3nbq...ey=vm3l0ux6t7k26p4kk6x2j1kdk&st=uhn6yolm&dl=0
- Pair the mini tree with a 20 node star - https://www.dropbox.com/scl/fi/kk9w...ey=qt8igxleqj2fp8as3u7cz1dde&st=eqynybfi&dl=0
- 300 node singing trees, basically the EFL tree, and is compatible with their xmodel, you just neeed to pay very close attention when pushing your pixels - recommend printing the xmodel image and following carefully - https://www.dropbox.com/scl/fi/kk9w...ey=qt8igxleqj2fp8as3u7cz1dde&st=eqynybfi&dl=0
I cant DXF these ones sorry as the design flow was...messy and not done with sharing in mind, but here they are, for the low low price of free.
I ran them all in 8mm coro this year, using a 12mm single flute upcut for beautfiul holes and an 8mm single flute upcut for excellent cuts.
I added some stuff to my F3D drop box - https://www.dropbox.com/scl/fo/bbq9...ey=q1f42kax37oy0pia7a8qc0ulb&st=57w7pgbu&dl=0
- 99 Node Candy Canes (just null pixel the end node for your 100strings and set it up as a 3x33 matrix, works great https://www.dropbox.com/scl/fi/7ji4...ey=fuyc91xqgkw6dk9ykk3lk5r73&st=19g5j4fz&dl=0)
- 80 Node MiniTree, Dalek style, makes a 180 deg tree, 16 x 5 https://www.dropbox.com/scl/fi/3nbq...ey=vm3l0ux6t7k26p4kk6x2j1kdk&st=uhn6yolm&dl=0
- Pair the mini tree with a 20 node star - https://www.dropbox.com/scl/fi/kk9w...ey=qt8igxleqj2fp8as3u7cz1dde&st=eqynybfi&dl=0
- 300 node singing trees, basically the EFL tree, and is compatible with their xmodel, you just neeed to pay very close attention when pushing your pixels - recommend printing the xmodel image and following carefully - https://www.dropbox.com/scl/fi/kk9w...ey=qt8igxleqj2fp8as3u7cz1dde&st=eqynybfi&dl=0
I cant DXF these ones sorry as the design flow was...messy and not done with sharing in mind, but here they are, for the low low price of free.
I ran them all in 8mm coro this year, using a 12mm single flute upcut for beautfiul holes and an 8mm single flute upcut for excellent cuts.
