Hi, all.

[Chris Irving]

I am a retired electrician/electronics technician and have done some minor repairs on LED lighting in the past.

 

[Mark_M]

Welcome to ACL @Chris Irving ,
Any electronics knowledge is valuable in this hobby, its just software that may be a learning curve.
The 101 manual is great and there's the live chat too for any questions.

 

[Chris Irving]

Thanx, Mark.
I was looking for info on the Big W starter kit using the KMV-C-300-130-AU xformer/controller. My wife bought a bunch of extension kits (but not the starter kit)for this system a couple of years ago, and I just need to know what I need to get them working since it seems as though the above xformer is not available now.

 

[David_AVD]

Hi Chris. Welcome to ACL.

Are these the newer 2-wire light sets ?

 

[Chris Irving]

Hi, David!
HNY! No. They are a 3 wire system, so there must also be a sequencer in the starter pack as well as the DC P/S. If I had something like a schematic diagram I could make something up that would work, but not flash. Naturally, if we could source an equivalent P/S and controller, great. I could easily whip up the 30vdc, but not a sequencer that was compatible. Thanks so much for your help.

 

[David_AVD]

From memory most of the Big W sets came with a plugpack / controller that was good to drive up to 3 sets of 200 LEDs.

I may have some of the controllers left that I removed from my sets when I went to computer control.