I think I broke my ecg-p2

[crispy]

Hi


So i bought the p2 a few weeks ago but have only been able to play with it recently. I have had issues with it blinking when it wasn't supposed to. I think it might be related to the strobe effect. I turned it on and the P2 seemed to develop a mind of its own. I got things working again but foolishly started looking at the strobe tab again and now I can't connect to it. I can connect via the UBL with both USB and ethernet but can't open the browser page. Have flashed the firmware, different IP addresses, and connecting directly. Am I missing something or is it broken?


Chris

 

[AAH]

There's 2 things to check. Firstly check that your PC is on the 192.168.0.1 IP range as that's what you appear to have your P2 set for and secondly on 1 of the setup screens there's an option for enabling Ethernet/E1.31 I think.

 

[Bill Ellick]

Here is the screen with the E1.31 enabled:


Chris,
Can you even get to the P2 through the browser at all at the 192.168.0.101 address?
Never mind, I just re-read your post on that !!

Have you checked your network settings to see that the TCI/IP settings will let you access it?

 

[crispy]

I have an ECG-P12R at 192.168.0.100 and have no problem accessing it. Ended up flashing version 2.7 of the firmware and it came back. Weird. Thanks though.

 

[Bill Ellick]

Glad to hear you got it running.
Sometimes things just go whacky for no reason and we panic (well at least I can get pretty miffed by things)!

Chalk it up to one for the books and press on eh?

Best wishes for the holidays!
Bill

 

[crispy]

Yeah one panic out of the way on to the next!

Cheers