LJ-01 three wire string controller bypass

[Diwasas]

Hi,

Fist time here Tried to search, but did not find any guide to related model.

This controller has 8 modes, the one I need is the last "steady glow". Is there any chance to bypass this type of controller?
Left two wires goes to wall socket. Right three goes to lights string.

 

[Diwasas]

Seems that by connecting these pins problem is solved

 

[Notenoughlights]

Please be careful when playing around with those type of controllers that run on 240V AC mains power, one wrong move and you could be seriously injured. Now that you have opened it, I want to take the assumption that its clips etc are no longer as strong as they used to be, I would highly suggest you secure the controller very well to prevent unwanted access to live terminals/wires.

 

[Diwasas]

Please be careful when playing around with those type of controllers that run on 240V AC mains power, one wrong move and you could be seriously injured. Now that you have opened it, I want to take the assumption that its clips etc are no longer as strong as they used to be, I would highly suggest you secure the controller very well to prevent unwanted access to live terminals/wires.

Thanks, I'm aware of that. I'll reassembly the box and hermetize all seams, should be fine, as the box will not get direct exposure to rain.

 

[gas.meter]

What’s the output voltage, please?

 

[MichaelF5]

if it's 240v into the control box then it'll be 240 out (with modulation for the various effects)