my first props lit up

lizardking

IT IS STILL ALL BENS FAULT
Joined
Dec 26, 2014
Messages
416
Location
Gold Coast
got my first 1D starburst or spinner done i wont be wiring the next one the way i did this one i ran all power from the center of the star to save on power injection then ran data from string to string in series and this is done with 2811 pixels 11 on each leg so 88 pixels all together
 

Attachments

logandc99

Dedicated elf
Joined
Jul 13, 2012
Messages
1,151
That looks great. Hmmm, might have to build me one or two of those :D
Thanks for posting the pics, esp the close up of the hub
 

lizardking

IT IS STILL ALL BENS FAULT
Joined
Dec 26, 2014
Messages
416
Location
Gold Coast
lizardking(adam) said:
got my first 1D starburst or spinner done i wont be wiring the next one the way i did this one i ran all power from the center of the star to save on power injection then ran data from string to string in series and this is done with 2811 pixels 11 on each leg so 88 pixels all together
just finishe my stand alone frames for the star bursts 25 mm pvc pipe 4x elbows and 2 t pieces i will just put sand bags on the legs so they dont fall over and i made them to suit the width of the coragations in the roof sheets of the pergola roof
 

Attachments

lizardking

IT IS STILL ALL BENS FAULT
Joined
Dec 26, 2014
Messages
416
Location
Gold Coast
lizardking(adam) said:
got my first 1D starburst or spinner done i wont be wiring the next one the way i did this one i ran all power from the center of the star to save on power injection then ran data from string to string in series and this is done with 2811 pixels 11 on each leg so 88 pixels all together
Graham here you go
 
Top